Can You Make a Homemade Pandora Jewelry Stand

Most of people realize that the proper way of storing and caring is much more important for the expensive jewelry. Some people store Pandora jewelry in the box or the airtight plastic to avoid the dust and possible chemical liquid touch. The professional jewelry collectors advise to store the jewelry on the jewelry stand when they are having rest.

A good jewelry stand gains both functions of decoration and special usage for all your jewelry. Are you frustrating when you searching the diamond earrings from the drawer with full of jewelry? A well-designed Pandora jewelry stand can hold all of your necklaces, earrings, rings, bracelets, chains, charms and so on. The most important is that you can find any jewelry you like in some seconds. Since the good jewelry stand is usually expensive, you can make a homemade jewelry at home with the following steps.

Search some used copper tubing from your garbage or other places and cut about 4 foot for using. Then warp a half of one end of the tubing in a spiral around the hitting end of a ball bat. Take away the tubing from the ball bat, and the spiral is an important part for Pandora jewelry stand.

Measure one foot at the end of the copper tubing and make a mark there. Spiral the tubing from the mark for about two or three inches long. The end of the tubing should be straight, which can slide over Pandora rings.

Repeat the above two steps to make other arms of the jewelry stand complete. You can make some small holes for placing the earrings. There should be the distance of at least 1/4 inch between the holes. If necessary, you can add some sticks on the tubing to put the Pandora charms.